5PCS 433.92MHz Gate Opener Remote, 4 Button Garage Door Opener Remote 433Mhz Electric Gate Garage Door Remote Control Duplicator Fob Opener for Electric Garage Door Car

Must see before buying: Pls confirm that your remote control meets these conditions: 1. the original remote control may be used normally. 2. frequency of original remote control is 433Mhz. 3. integrated circuit model of original remote control is 2260 (all manufacturers), 2262 (all manufacturers), PT2264， SMC5326 (all manufacturers), SC5262,HT600, HT680,HT6207,HT6010,HT6012, HT6014, SMC918 series.527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers) and foreign-non-standard codes and domestic and foreign rolling codes, see the list for detailed brands. Step 1 : Clear codes Press the A button and B button at the same time, after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press. Step 2: Copy method One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to back of the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code. Resume/Recovery Code If you clear code of duplicating remote control incautiously, you can press Button C and Button D at the same time, the LED Indicator Light flash fast. It means that the code of duplicating remote control is resumed. Support Coping the following Codes: PT2262 PT2264 PT2260, PT2240, PT1527, SC2262, SC2260, EV1527, SCT527, HS1527, HS2240, SCL1527, FP1527 HS2262 HS2260 LX2262 LX2260 EV1527 encoding chip (With this remote duplicator you can clone all 433.92MHz fixed code key fobs. Some remotes that use this frequency are listed above. If you fail in copying with proper operation, you might have to check whether your device has a chip above).

• Compatible IC chip: The fixed and roling frequency 433.92mhz remote cloner for copying 99.99% common fixed and learning code remote controls. The 433Mhz automatic sliding gate opener are compatible with 2264, 2260,1527, FP527, 2240, SMC918, and so on; Please confirm your chips whether suitable before ordering
• Clear the Old Code: Press and hold the A and B keys on the remote control at the same time,Press and Hold "A" and "B" buttons together---Led will flash 3 times. And then release "B" button and click "B" button 3 time---Led will flashing. At this time all the memory data is cleared.(you can press any key to test, press any key of the remote control, the indicator light will flash down and go out, that means the code is cleared successfully.)
• Easy to Duplicate: After clearing the old code,place the copy remote control side by side with the original remote control,Press and hold button A of the original remote control, then press and hold button A of the copy remote control until the LED of the copy remote control blink to constant light, indicating successful copying. Repeat the above steps for the remaining buttons. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate
• 4 Keys to Control: 4 buttons on the remote controls for gates, A, B, C, D, are applied for opening, closing and stopping doors, which are convenient and practical; You can use them for rolling shutter doors, rolling shutter doors, telescopic doors, garage doors, road doors
• Please make sure your opener's remote model can be find in the Brand Copy List. If your remote control model can't find in our Copy Brand List,please do not but this model